Kitchen Showroom NY

Why Choose DuPont™ Corian®?

You have distinctive desires – and design considerations – for your home. You demand top-notch performance from every element of your new home or remodeling project. And that’s where Corian® truly shines. Its proven performance more than fulfills expectations, reflecting well on your choice – and on you – for years to come. Corian® solid surfaces are smooth and nonporous. As a result, they will not promote the growth of mold, mildew or bacteria. And because it’s nonporous, liquids and stains can’t penetrate Corian®, so it’s easy to clean and maintain. Corian® is also nontoxic, and chemically nonreactive, with virtually no off-gassing at normal room temperatures, in accordance with building codes and other local restrictions.

Care and Maintenance Tips

Corian® was created for a lifetime of easy care. Just follow the simple guidelines listed here to keep your Corian® surfaces looking as fresh as the day they were installed. Your care and maintenance kit will provide you with the tips and tools to help you enjoy your new Corian® top for years to come.

Routine Care

There are three types of countertop finishes: matte/satin, semi-gloss and high-gloss*. Most countertops are finished with a matte/satin finish. All sinks have a matte/satin finish. Soapy water, ammonia based cleaners or commercially available solid surface cleaners will remove most dirt and residue from all types of finishes. Stubborn residue will require a little stronger cleaner. Follow the recommendations on the next page to properly clean your countertop and sink.

With over 100 colors and varying hues some colors may appear to require more frequent cleaning to maintain a uniform finish.

Darker colors tend to require more attention than lighter colors.

Over time through care and use your countertop will acquire a patina, changing the appearance of the finish. You may restore the look of the original finish by following the refurbishing guidelines on the next page. *Contact your local Corian® sales expert if you are unsure of your finish.

Countertops

• DO NOT get bleach solution in eyes or on bare skin. Always wear rubber gloves and protective eyewear when working with bleach.
• Over the counter cleaners, such as, Clean EnCounters® may be used for routine cleaning in place of soap and water.

¹ Countertop Magic is a registered trademark of Magic America Corp.
² Hope’s Countertop Polish is a registered trademark of The Hope Co.
³ Enhance Countertop Polish is a registered of Eastern Marble Co.

Preventing Heat Damage

Corian® is an excellent material for heat resistance. As with all countertop materials, it is important to use common sense to minimize direct heat exposure to protect your surface and investment. Use heat trivets or hot pads when placing hot objects on any surface and allow cookware to cool before placing them into a Corian® sink.

Preventing Other Damage

In most cases Corian® can be repaired if accidentally damaged. However, be sure to follow the guidelines here to prevent any permanent damage to Corian®.

• Avoid exposing Corian® to strong chemicals, such as paint removers, oven cleaners, etc. If contact occurs, quickly flush the surface with water.
• Do not cut directly on Corian® countertops.
• Boiling water alone will not damage your Corian® sink; however it’s a good practice to run your faucet while pouring boiling water into your sink.

Removing Minor Cuts and Scratches*

Because the solid beauty of Corian® goes all the way through, Corian® surfaces are completely renewable. You can remove minor cuts and scratches yourself by following these instructions.

• Judge the severity of the scratch and start with the finest grit sanding pad to remove the scratch. (The color of the pads from roughest to smoothest are: White, Yellow, Green, Peach, Lilac, Blue, Gray.) Rub over scratch in a straight line to remove it. Periodically switch rubbing direction 90°. Be sure all of the scratch is removed. If this first step takes too long, try the next heavier grit sanding pad. To minimize dust during sanding, wet the surface. Rinse pad periodically to clean residue.
• Clean top with water. Select next lighter grit and repeat process. Rub over a larger area to blend in sanding.
• Continue process using successively finer grits until desired gloss level is achieved. Rinse out all pads used and air dry before putting them away.

Sources for materials mentioned above: